Licensed & Insured, in Springfield and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Springfield
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (413) 266-5240 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Springfield and surrounding areas · On-site visits included · Free estimate within 24h
Springfield Metal Roofing is a team of local certified professionals based in Springfield. We respond quickly in Springfield and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (413) 266-5240⭐⭐⭐⭐⭐ 4.9/5 · 163 verified Google reviews
“Our old barn roof was leaking in three spots and we figured we'd have to tear the whole thing off. Springfield Metal Roofing came out, did a full inspection, and re-fastened the panels with new screws and replaced the flashing around the cupola. Two days of work and it's bone dry through the last two storms.”
Commercial & Agricultural Metal Roofing
“We wanted to cover the porch roof without ripping off the old shingles, and they walked me through the retrofit option step by step. The crew of four knocked it out in a day and a half, and you honestly can't tell there are shingles underneath. Only reason I'm not giving five stars is they left a few stray screws in the driveway I found with my tire.”
Metal Roof Over Shingles (Retrofit)
“Had them put a red ribbed panel roof on our equipment barn out on the back field. They measured everything twice, and the panels lined up perfectly along the ridge. Looks sharp from the road and the price was fair for the square footage.”
Corrugated & Ribbed Panel Roofing
“After two summers of patching the old asphalt roof, we finally went standing seam on the whole house. Springfield Metal Roofing handled the tear-off, the underlayment, and the new gutters all in one go. Three days start to finish, and they swept the yard clean every single evening.”
Standing Seam Metal Roofing
“Water was coming in around the chimney every time it rained hard. They got up there, found the flashing had pulled loose, and had it sealed and re-set in one afternoon. No more drips and no upsell pressure.”
Flashing, Chimney & Skylight Repair
“Really impressed with how organized these guys were. New metal roof on our 1,800 square foot ranch, and they had a five-man crew that treated the place like their own. They even re-hung a gutter section that was sagging, no extra charge. House looks brand new.”
Metal Roof Installation
“Replaced our old rusted-out metal roof with stone-coated steel and I couldn't be happier with the finish. It's got that textured look my wife wanted without the weight of shingles. Took them about four days and they hauled off every bit of the old material.”
Metal Roof Replacement
“Called them for an inspection after the windstorm and they found a few lifted panels plus some loose fasteners I never would've noticed. Fixed it all on the spot. Honest folks, fair price, and they actually showed me photos of what they found.”
Metal Roof InspectionReal photos of our work in Springfield · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam metal roof installation | Starting at $12/sq ft | Concealed fasteners, high-temp underlayment, full flashing; pitch and panel width move the price |
| Exposed-fastener panel roof installation | Starting at $8/sq ft | Screw-down corrugated or ribbed panels, underlayment and trim; deck repair adds cost |
| Metal shingle or stone-coated steel installation | Starting at $11/sq ft | Stamped or granule-coated panels with interlocking seams; complex hips and valleys raise it |
| Tear-off and deck repair | On estimate | Number of old layers, rotted sheathing and access on tight city lots need an on-site look |
| Travel | Included | in Springfield and surrounding Pioneer Valley towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (413) 266-5240, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, simple gable | Starting at $10/sq ft | Includes tear-off of one layer, underlayment, panels, and standard flashing on a straightforward roof. |
| Standing seam with complex geometry | From $14/sq ft | Multiple valleys, dormers, and chimneys add labor and detail work, which is the main cost driver. |
| Copper or specialty metal | On estimate | Material cost and detailing vary widely, so we price after seeing the roof and panel layout. |
| Deck repair or replacement | On estimate | Soft sheathing found after tear-off is priced per sheet once we see the actual condition. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (413) 266-5240, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, disposal, underlayment, and standard flashing on simple roof shapes and moderate pitches. |
| Standing seam replacement | Starting at $13/sq ft | Concealed fasteners and clean lines; price rises with roof pitch, dormers, and valley count. |
| Metal shingle or stone-coated steel replacement | Starting at $14/sq ft | Includes tear-off and stamped or granular panels; historic district and HOA approvals can add lead time. |
| Deck repair and sheathing replacement | On estimate | Priced per sheet after tear-off reveals rot or delamination; needs an on-site look before a number is firm. |
| Travel | Included | In Springfield and surrounding Pioneer Valley towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (413) 266-5240, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel over existing shingles | From $7/sq ft | Includes deck inspection, separation layer, edge metal and panel installation; roof pitch and layer count move the price. |
| Standing seam over shingles | From $11/sq ft | Concealed-fastener panels with prepared separation layer; panel gauge and roof complexity drive the rate. |
| Metal shingle or stone-coated steel retrofit | From $13/sq ft | Stamped or granule-coated panels over sound decking; historic district color requirements can add cost. |
| Tear-off and full replacement | On estimate | Needed when two or more shingle layers, soft decking or failed flashing make a retrofit unwise. |
| Travel | Included | in Springfield and surrounding Pioneer Valley towns, no separate call-out or mileage fee. |
| Estimate | Free | Written scope within 24 hours at (413) 266-5240, no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak or flashing repair | Starting at $450 | Includes inspection, leak trace, and reseal or flashing repair at one location, with access and roof pitch as the main cost factors. |
| Screw replacement and re-fastening | Starting at $650 | Covers pulling failed screws and replacing washers on a typical slope, priced by roof size and number of fasteners. |
| Panel replacement (one to three panels) | Starting at $850 | Includes matching panel profile and gauge, removal, and installation, with panel availability and roof height moving the price. |
| Chimney or skylight flashing rebuild | Starting at $750 | Covers removing old flashing, rebuilding the seal, and water-testing, with steep gables and complex roofs costing more. |
| Complex or large-scale repair | On estimate | Multi-slope damage, storm-wide repairs, or mixed profiles need an on-site look before we give a number. |
| Estimate | Free | Response within 24 hours at (413) 266-5240, no obligation to book, written scope provided. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-source leak repair | Starting at $450 | Includes diagnostic trace and a straightforward fix like fastener or small flashing repair; height and pitch raise it. |
| Fastener replacement run | Starting at $650 | Replaces a section of failed screws and washers; total area and panel type move the price. |
| Flashing rebuild (chimney or skylight) | Starting at $850 | Covers removal and rebuild of failed flashing; detail complexity and access are the main cost drivers. |
| Ice-dam leak correction | On estimate | Eave detailing and underlayment work vary too much by roof to quote without an on-site look. |
| Emergency tarping | Starting at $350 | Temporary weatherproofing after storm damage; roof size and access conditions move the number. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor screw replacement (single slope) | Starting at $750 | Covers up to 25 failed fasteners with new UV washers and a water check. |
| Standard re-fastening (whole roof) | Starting at $1,450 | Full walk-over, replacement of loose and rusted screws, and new washers. |
| Oversized screw re-fastening | Starting at $950 | For stripped or enlarged holes; includes larger screws and sealing washers. |
| Complex or large-scale job | On estimate | Steep pitch, multiple levels, or widespread wind damage needs an on-site look. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (413) 266-5240, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel install on a detached garage | Starting at $5.50/sq ft | Includes panels, washered screws, closures, and basic trim; deck repair adds cost. |
| R-panel or 5V install on a shop or barn | Starting at $7.00/sq ft | Includes heavier gauge panels and trim; steep pitch or staging raises the rate. |
| Tear-off of existing shingles before panel install | Starting at $1.75/sq ft | Covers removal and disposal; number of existing layers and deck condition move it. |
| Re-fastening and leak repair on existing panels | Starting at $450 | Includes new washered screws and sealing; panel count and access drive the final price. |
| Complex or large commercial outbuilding | On estimate | Multi-penetration, long-span, or structural repair work needs an on-site look first. |
| Estimate and travel | Free | In Springfield and surrounding towns, response within 24 hours at (413) 266-5240. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard gable | Starting at $9/sq ft | Includes tear-off, underlayment, metal shingles and standard flashing on a simple low-pitch roof. |
| Complex or steep-pitch roof | From $13/sq ft | Covers dormers, multiple valleys and steep pitches that slow the crew and add flashing work. |
| Retrofit over existing shingles | From $7/sq ft | Includes underlayment and metal shingles over a sound roof, within local code layer limits. |
| Historic district or HOA design review | On estimate | Profile and color approval adds design review time, so we price it after seeing the scope. |
| Travel | Included | In Springfield and surrounding Pioneer Valley towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (413) 266-5240, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof replacement | From $9/sq ft | Installed with underlayment, ice shield, and trim; pitch and tear-off layers move the price. |
| Historic or complex profile install | On estimate | Steep gables, turrets, valleys, and design review add labor and trim complexity. |
| Deck repair and flashing rebuild | On estimate | Soft sheathing or chimney and skylight flashing work priced after an on-site inspection. |
| Travel | Included | In Springfield and surrounding Pioneer Valley towns, no separate mileage fee. |
| Estimate | Free | Response within 24h at (413) 266-5240, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window, dormer) | Starting at $20/sq ft | Includes templating, fabrication and soldered seams on small accent areas. |
| Zinc standing seam roof | Starting at $24/sq ft | Includes panels, clips and expansion details; pitch and access move the price. |
| Full copper architectural roof | Starting at $35/sq ft | Includes deck prep, custom fabrication and soldered seams on full roofs. |
| Custom flashing and trim | On estimate | Chimney caps, valleys and counterflashing priced after an on-site look. |
| Travel | Included | In Springfield and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (413) 266-5240, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential recoating (single-story, light chalking) | Starting at $2.50/sq ft | Includes wash, spot prime and one finish coat on an accessible low-pitch roof. |
| Rusted panel roof with rust conversion | Starting at $3.75/sq ft | Adds mechanical rust removal, converter and primer over laps and fastener lines. |
| Steep or complex roof (Victorian, dormers, multiple valleys) | Starting at $4.50/sq ft | Reflects staging, fall protection and cutting around chimneys and dormers. |
| Commercial or agricultural metal | On estimate | Large square footage and reflective systems need an on-site measurement first. |
| Estimate | Free | On-site inspection and written quote, response within 24 hours at (413) 266-5240. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Chimney flashing repair | Starting at $600 | Covers a standard reflash on an accessible roof; height, pitch and masonry condition move the price. |
| Skylight curb flashing repair | Starting at $750 | Includes new curb flashing and seals; number of skylights and roof access are the main cost drivers. |
| Valley and wall flashing | Starting at $900 | Replaces valley or step flashing; roof pitch and how much old material comes out affect the total. |
| Multiple leaks or complex chimney | On estimate | Several penetrations or masonry work need an on-site look before we quote a number. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (413) 266-5240, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-plane bar guard layout | Starting at $1,200 | Covers one roof plane with standard access, includes clamps, bars, and layout planning. |
| Multi-plane or steep-pitch layout | Starting at $2,400 | Adds rows and setup time for steep gables, dormers, and multiple drop zones. |
| Pad-style guards on exposed-fastener panels | Starting at $1,500 | Fastened through corrugated or ribbed panels, priced by panel count and roof area. |
| Heat cable at the eave | On estimate | Needs an on-site look at the eave run, gutter, and electrical connection before pricing. |
| Travel | Included | in Springfield and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (413) 266-5240, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, fastener and flashing inspection with photos and a written repair-versus-replacement recommendation. |
| Minor repair (fasteners, flashing) | Starting at $350 | Re-fasten backed-out screws and reseal flashing; price moves with roof height and access. |
| Panel and seam repair | Starting at $650 | Replace damaged panels or re-hem lifted seams; cost depends on panel profile and matching availability. |
| Ice dam and underlayment repair | On estimate | Torn underlayment and wet sheathing need an on-site look before a number is given. |
| Insurance documentation | Included | Photo documentation and written scope formatted for your claim, included with any repair we perform. |
| Estimate | Free | Response within 24 hours at (413) 266-5240, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard metal roof inspection | Free estimate | Includes roof-level walk, photos, written findings and remaining service life; roof size and pitch move the price. |
| Pre-purchase inspection report | Starting at $250 | Detailed buyer report with repair costs and documentation; number of chimneys and skylights affects the scope. |
| Insurance documentation inspection | Starting at $300 | Photo evidence and written findings for storm or ice-dam claims; urgency and documentation depth move the price. |
| Exposed-fastener audit | On estimate | Fastener-by-fastener review with a re-fastening scope; panel count and roof access determine the number. |
| Travel | Included | In Springfield and surrounding valley towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (413) 266-5240, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless K-style gutter, single story | Starting at $9/linear ft | Formed on site with hidden hangers, standard downspouts, and cleanup included. |
| Half-round seamless on a historic home | Starting at $16/linear ft | Classic profile for Victorian and historic-district homes, with matched hangers and custom corners. |
| Oversized 6-inch run with extra downspouts | Starting at $14/linear ft | Higher capacity for steep gables and large roof planes, priced by run length and outlet count. |
| Panel-mounted hanger system for standing seam | Starting at $18/linear ft | Brackets that attach to the standing seam rib without piercing the panel or voiding warranty. |
| Old gutter removal and fascia repair | On estimate | Needs an on-site look to price disposal, soft wood, and any drip edge repair. |
| Estimate | Free | Response within 24h at (413) 266-5240, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn or agricultural re-roof | Free estimate | Includes on-site inspection, panel recommendation and written scope; square footage and deck condition move the price. |
| Light commercial standing seam | Starting at $14 per sq ft | Covers concealed-fastener panels, underlayment and standard flashing; roof height and parapet work raise the rate. |
| Repair and re-fastening | Starting at $650 | Replaces rusted screws, seals seams and re-flashes penetrations; access and panel count drive the final number. |
| Insulated panel system | On estimate | Rigid insulation and vapor control need an on-site look at the deck, use and snow load before pricing. |
| Travel | Included | In Springfield and surrounding Pioneer Valley towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (413) 266-5240, with no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Springfield need a crew that understands the Connecticut River valley, not a storm chaser passing through. Springfield Metal Roofing is the local name for metal roof installation, replacement, re-roof, and repair on homes from the triple-deckers of Hungry Hill and Mason Square to the steep-gabled Victorians of McKnight and the tidy Capes of Forest Park and Sixteen Acres. We know the heavy tree cover, the snow load, the ice dams at the eaves, and the large stock of aging screw-down roofs whose fasteners are backing out.
Our network of licensed, insured local contractors serves Springfield, West Springfield, Chicopee, Holyoke, Agawam, and the surrounding Pioneer Valley communities. Whether you need a standing seam roof on a hillside Colonial or a leak stopped on an old ribbed panel barn, we give straight guidance on repair versus replace. Call (413) 266-5240 or request a free estimate to get started.
Most metal roof leaks in Springfield start with the fasteners. On exposed-fastener roofs that are 15 to 30 years old, the EPDM sealing washers under each screw dry out, shrink, and crack, letting water past the head. That is the number one cause we find. The second is seam separation from thermal movement, where panels expand and contract with freeze-thaw cycles until the seam opens. Failed pipe boots and flashing at chimneys, skylights, and valleys let water in at the most vulnerable points, and wind-lifted panels or punctures from fallen limbs finish the job after a nor'easter or summer storm.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so by the time you see a stain on the ceiling, the sheathing underneath may already be rotted and the insulation soaked. Our metal roof leak repair starts with finding the true source, not just the wet spot. Then we make the honest call: a full screw replacement with new washers often restores a watertight roof for a fraction of replacement cost, while a roof with widespread rust-through or failed seams may be better replaced. Call (413) 266-5240 to schedule a metal roof repair visit.
We also handle flashing, chimney and skylight repair, and storm and wind damage repair. If your roof is older and you are not sure whether it can be saved, a metal roof inspection gives you a clear answer before you spend money on the wrong fix.
We install the full range of metal roofing systems and match the system to your home, not the other way around. Standing Seam Metal Roofing uses concealed clips and hidden fasteners for a clean, premium look with no exposed screws to maintain. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic homes.
Here is the honest comparison: standing seam costs more up front and has no exposed screws to service, while screw-down costs less and needs its fasteners checked and replaced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) can be a legitimate way to save on tear-off, but when the decking is soft or the existing layers are too many, a full Metal Roof Replacement is the right call.
Metal roof pricing in Springfield is usually quoted per square foot for installations and often flat-rate for repairs. The final number depends on the panel system and metal gauge, your roof pitch and complexity, whether we tear off or recover, the condition of the decking, and access around the house. Typical ranges vary widely, and final pricing depends on the roof and site conditions, so we measure and inspect before we quote. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a realistic ballpark before you call, see our pricing page. Then request a free estimate or a free roof inspection so we can give you a written number based on your actual roof, not a guess.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with the carrier, and we make no promise that a claim will be approved. We document what we see and leave the coverage decision where it belongs.
On permits: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements are set locally. Historic district or HOA design review can also restrict panel profile and color choices. Requirements vary, so always verify with the Springfield building or planning department before starting your project. To schedule an inspection or ask a question, contact us.
Ready to get started? Springfield Metal Roofing serves in Springfield and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Springfield · Response within 24h · No commitment · ☎ (413) 266-5240
Your Free Quote Request